Recently we’ve had a few questions from customers asking how to replace springs on their tools and how to keep them (tools) cleaned and well maintained. I thought I’d share……
[Read more…]
Xuron® Tools for 3D Printing
Five years ago I wrote a blog post about Xuron® Tools for 3D Printing. At that time, 3D printers were not readily accessible to the average consumer or small manufacturer. They were mainly used for making prototypes and everything about the process seemed intimidating (at least to me).
Speed ahead to 2020 and 3D printing has evolved. It seems there is nothing that cannot be created with this technology – even human organs and body parts (known as bioprinting). 3D printing in 2020 also gave way for many people to get creative during time extended time at home. We all saw stories of people making face mask extenders, face shields and more.
[Read more…]
Micro-Shear® Flush Cutters – FAQ
Micro-Shear® Flush Cutters, how do you choose the right one?
In the last few years we’ve seen more and more brick-and-mortar stores closing. This has left a significant hole in the jewelry community. Jewelers have fewer resources and less access to knowledgeable people. We’ve been fielding more and more phone calls asking for help choosing the right tool for the job.
Model Railroad Track: A Beginners Guide to Rail Cutting
This article was originally published on our Blog in September of 2017. We are rebroadcasting it because the content is still very relevant and 2019 represents the 30th anniversary of our introduction of the Model 2175B Track Cutter to the model hobby market. Thank you for 30 years of support and encouragement!
How To Get Best Results When Cutting Cable Ties
Cable Ties, also known as tie wraps or zip ties, are commonly used in the industrial sector for bundling wire, cable and cords to keep them neat and organized. Consumers also regularly use them to secure totes, luggage and retail items. Their strength makes them appealing, but when cut without the right tool, it’s easy to cut or scratch yourself with a sharp edge. Our Cable Tie Cutter makes the task easier and safer.
Cable ties should always be cut flush to the termination point, leaving no spike on the cut end. This is especially important in a manufacturing environment. The spike is what could cause scratches or cuts to people doing wire and cable work.
Xuron Corporation’s Model 2275 Cable Tie Cutter offers an effective and safe solution for cutting plastic and nylon cable ties up to 7 mm wide. And, it leaves a nice flat cut on the cable tie.
- 1
- 2
- 3
- …
- 6
- Next Page »