FAQ: How To Replace Springs & Keep Tools Well Maintained

Xuron® Cutter with spring and hand grip to illustrate how to replace springs

Recently we’ve had a few questions from customers asking how to replace springs on their tools and how to keep them (tools) cleaned and well maintained.  I thought I’d share……

How can I replace the springs on my Xuron® Cutters and Pliers?

Spring failure, though uncommon, is an easy fix.  Contact us by email or telephone, let us know the tool model number(s) and quantity and we will send springs along with these simple instructions for replacement:

How to replace springs on Xuron® Cutters and Pliers.

Note: if you don’t want to replace the springs yourself, you are more than welcome to return the tools to us and we will do it for you. Our turn around time is two to three business days.

How do I clean the hand grips?

The easiest way to clean the grips is to use a pre-moistened wipe (Clorox® or any generic store brand).

How do I keep the cutting and pliers blades clean and rust-free?

A light oil like WD-40® works well. Put a small amount of it on a soft cloth and wipe the cutter/pliers blades as well as the rivet area and other exposed metal surfaces.  This process also acts as a rust preventative. Here’s a video demonstrating the process by @csldesigns on Instagram:

Please contact us if you have tool or application specific questions  – maybe yours will make our next blog post!

Abby Robey

I am the Vice President of Sales & Marketing at Xuron Corporation. I've had the pleasure of working here for 25 years and one of my favorite parts of the job is meeting Xuron® tool users and hearing the feedback about the products we make.

Comments

    • Abby Robey says

      Thank you for this comment. So that we can best help you — please provide us with a more detailed description of what you are doing and exactly which tools you are using. How, specifically, did they not meet your expectations?

    • Abby Robey says

      Hello Bob,

      Thank you very much for contacting us with this question.
      Our Model 2193 and/or Model 2193F Hard Wire Cutters will both cut this size wire.

      Please feel free to contact us again if you have further questions. Thank you!

Leave a Reply

Your email address will not be published.

Copyright © 2019 Xuron Corporation · All Rights Reserved
Privacy Policy  •   Terms of Service  •   Disclaimer

Subscribe to Our Newsletters

Topics